【Mac 및 Windows 시스템 지원】 쉬운 설치, 고속, 대부분의 Windows 및 Mac 시스템에서 작동합니다. 맞춤형 라벨을 직접 인쇄 할 수 있습니다. 기술 도움이 필요하면 우리에게 오십시오.
【돈과 시간 절약. 】 잉크 나 토너가 필요하지 않습니다. 이 작은 휴대용 4x6 열 라벨 프린터와 함께 사용하면 배송 패키지에 대한 명확한 라벨을 인쇄 할 수 있습니다. 사무실, 창고 및 집에서 사용하기 쉽습니다.
【150 PC 라벨】 잠긴 공기 잉크없는 직접 배송 라벨 프린터, 150 pcs 열 라벨 시트 용지, 조작 설명서, 설정 드라이버 링크가 패키지에 포함되어 있습니다.
【다중 인쇄 라벨 크기 지원】 2 ''(50mm)-4.65''(118mm) 에서 라벨 인쇄를 지원합니다. 필요에 따라 명확한 배송 라벨, 우편 주소, 제품 태그, 주방 라벨링 스티커를 인쇄 할 수 있습니다.
다운로드 드라이버
Notice:
1. The shipping label printer for small business doesn’t support wifi or bluetooth. Use the USB cable to connect with PC or laptop.
2. No label holder or tray in the package. You can just put fan-fold label sheets on table.
3. This 4x6 thermal label printer compatible with MAC OS 10.9, MAC OS 10.15, MAC OS 11, MAC OS XP, Linux(ubuntu), Windows 03,Windows 7,Windows 8, Windows 10.
Specification：
| Machine Spec | |
Printing method | Thermal line printer |
Paper loading method | Easy paper loading/auto paper feeding |
Printing speed | Actual speed detection: 127.38mm/s |
Printing paper width | 104mm |
Effective resolution | 203 dpi (300 dpi optional) |
Paper type | Continuous paper, label paper, black label paper |
Thickness of printing paper | 0.06-0.18 mm |
Effective printing width | Min 38mm Max 112mm |
Character size | ASCII Font A: 12x24 ASCII Font B: 9x17 Chinese character 24x24 |
Interface type | USB |
Power adapter | DC 24V — 2.5A |
Working environment | Operating temperature: 0- 45°C, Operating humidity: 20-90% |
Storage environment | Storage temperature:-10 ~ 60°C, Storage humidity: 10-90% |
Troubleshooting
The table below shows common problems and solutions for operators.
If you have followed the simple troubleshooting methods but the printer is still not functioning properly, please contact the customer service department of your dealer for assistance.
| Troubleshooting | ||
POWER indicator is off | a. The AC plug and the power supply plug are not properly connected to the printer socket. b. The printer power switch is not on. | a. Check the power connection and confirm that the AC plug and the power supply plug are properly connected to the printer socket. b. Turn on the printer. |
Unable to print | a. The communication cable is not properly connected to the printer and PC host. b. Communication interface setting error. c. Print status error. | a. Reconnect the communication cable. |
Incomplete print content | a. The paper is not centered. b. Label size setting is incorrect. | a. Adjust the paper position. b. Set the correct label size. |
Incorrect positioning | a. Label learning is not performed. b. Seam label detection photocoupler is offset. c. Wrong mode selected. | a. Label learning is performed. b. Open the cover to confirm whether the seam label detection component is offset. For black label paper, move the seam label detection component according to the black label position so that the detection photocoupler can detect the black label. Label paper/continuous papen The detedion photocoupler must be in the paper range. c. Use the setting tool to open the printer information and confirm whether the paper type is the same as the paper loaded in the printer, which can be changed by using the setting tod. |
Poor print result | a. Paper loading error. b. Print densrty/speed setting error. c. Print head/rubber roller has dust or adhesive accumulation. d. The print head is damaged. | a. Reload the paper. b. Readjust the print density/speed of printer by using the setting tool orihe software. Priiting density can be coarsely tuned with the settrig tool and finety tuned with the driver. c. Clean the print head/rubber roller. (refer to 8.1 "Cleaning Print Head"/82' Cleaning Sensor*78.3 "Cleaning Printing Rubber RoHeT of the Manual.) d. Use the setting tool to d*ct bad point of head piece. If the print head is damaged, please contact the customer service department of your dealer ftx repairs. |
| Fault Phenomenon Cause Solution | ||
Fault Phenomenon | c. Cause | c. Solution |
POWER indicator is off | d. The AC plug and the power supply plug are not properly connected to the printer socket. e. The printer power switch is not on. | d. Check the power connection and confirm that the AC plug and the power supply plug are properly connected to the printer socket. e. Turn on the printer. |
Unable to print | d. The communication cable is not properly connected to the printer and PC host. e. Communication interface setting error. f. Print status error. | a. Reconnect the communication cable. |
Incomplete print content | c. The paper is not centered. d. Label size setting is incorrect. | c. Adjust the paper position. d. Set the correct label size. |
Incorrect positioning | d. Label learning is not performed. e. Seam label detection photocoupler is offset. f. Wrong mode selected. | d. Label learning is performed. e. Open the cover to confirm whether the seam label detection component is offset. For black label paper, move the seam label detection component according to the black label position so that the detection photocoupler can detect the black label. Label paper/continuous papen The detedion photocoupler must be in the paper range. f. Use the setting tool to open the printer information and confirm whether the paper type is the same as the paper loaded in the printer, which can be changed by using the setting tod. |
中文
Jan 25,2024